|
























|
|

NAFA ENGINEERING PRODUCTS FACTORY
PRODUCTS & SERVICES
Center Pivot Irrigation System (CPIS)
| |
Description |
File Name |
Size (KB) |
Estimated Time of
Downloading (HH:MM:SS) |
 |
Download and View Leaflet |
nepf_pivot.pdf |
159KB |
00:01:00 |

-
CPIS is used in irrigation of desert and reclaimed lands
-
CPIS is used in irrigation of farms and crops
-
Heavy duty operation and optimal distribution of water
CPIS Structure:
1. Center Tower and Drive Towers:-
-
Tower legs are L-profiles of 80 x 80 x 7 mm.
-
Braces are L-profiles of 50 x 50 x 5 mm.
-
Feed pipe is 219.9 mm outer diameter, wall 3.2 mm thick.
-
All items hot-dip zinc-galvanized after fabrication.
-
CPIS is provided with control panel and electric box at the
top of the system.
-
CPIS is provided by a gauge to measure water pressure into
the system
-
CPIS is provided with a flexible watertight seal
2. Span Structure:-
-
Span pipes are 168.3 mm outer diameter, wall 2.8 mm thick,
12,000 mm long.
-
Stabilizers are L-profiles of 50 x 50 x 5 mm.
-
Truss rod is 20 mm in diameter, heavy duty steel.
-
All items hot-dip zinc-galvanized after fabrication.
-
Flexible rubber joints between the tower to allow easy
movement.
-
Spray steel V-pipes are 21.7 mm outer diameter, wall 2.6 mm
thick, hot-dip zinc-galvanized, and the distance between them is 3,000 mm.
-
Wide tires 14.9 x 24 are assembled on hot-dip zinc-galvanized
steel rims, on heavy duty gear box.
3. Main control panel:-
4. Electric motor for gear box:-
5. Tower control box:-
6. Sprays:-
|